The G-MME (Gianneschi Marine Mist Eliminator) allows to separate the water drops, moisture and salt spray carried by the intake air and exhaust flow in marine applications. The high efficiency blade profiles, made in extruded white polypropylene, ensure a constant performance.Blades must be mounted vertically with horizontal air flow.
 
The G-MME can be designed and manufactured in a wide range of sizes, blades pitch and stages to meet various operating conditions. In addition is available in a single stage or in double stage for high separation efficiency in high velocity applications.
The principal advantages arising from the use of G-MME are:
  • Low air pressure drop
  • High mechanical and corrosion resistance
  • Customized design (dimensions, materials,
  • blade profiles, draining system, etc.)
  • Easy installation and handling tanks to its
  • modularity and lightness
  • Effective maintenance
 
For applications where is required an high grade of separation efficiency G-MME can be realised with further blade profiles to meet the customer specific requirements.

 

GENERALITY

The system, based on a frequency inverter, regulates with precision and fastness the blower’s speed according to the plant’s demands. Speed regulation, according to the installed model, can be done in the manual mode and/or in automatic mode. The G-touch panel display and allows to modify the system’s status and parameters. The units are fully programmable which allowing the use of a wide range of blowers in different applications. The Control Fan, is built in a compact and modular configuration in order to allow an easier installation and startup.

APPLICATIONS

The Control Fan is a Speed Regulation System used as a variable frequency drive controller for blowers; ideally used in engine rooms for yachts and mega yachts. This system, designed and manufactured exclusively by Gianneschi Pumps and Blowers for specific ventilation control in order to get and maintain the best temperature in engine room.

VERSIONS

The Control Fan system is realized in Manual, Semi- Automatic and Automatic versions.
 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Vibrations damping rings are flexible items built in a special rubber (EPDM )for vibration absorption. They are mounted between the blower flange and the plant pipe (or fixing surface) to avoid the transmission of noise and vibrations when the blowers are in operation. These items are fixed by screw placed on both sides of the ring realising a flexible but stable fixing.
The elastic ring absorbs all vibrations by converting movement. energy into deformation work, in that way they reduces noise and lengthen the life of the equipments installed.

Pages